GuardMagic VB8 Road Fuel Tanker Monitoring

Module is intended for remote monitoring fuel level in compartments of fuel trailer (semi-trailer), remote supervision of tanker-truck movement, monitoring of tractor (track) fuel consumption and tanker-truck status.

Module has two digital communication interface EIA-485.

Module supports up to THREE regular fuel tanks and up to ELEVEN cargo tanks (cargo compartments).

ABOUT

FUNCTIONALITY

TABLE

CONNECTION

ON TANKER

GUARDMAGIC VB8 FUNCTIONALITY TABLE

			NOTES
1	Power source
1.1	Main power (vehicle battery)	+	12 /24 V (9 … 30 V)
1.2	External reserve battery	+	12 V , 1,2 A/h

2	Inputs-Outputs in general
2.1	Logical inputs (in summary)	7
2.2	EIA-485 interface ("digital fuel bus")	+
2.3	Quantity of EIA-485 interface (“digital fuel bus”)	2
2.4	1-Wire interface	2
2.5	RS-232 interface (for advanced functionality)*	+
2.6	Pulse input	1
2.7	Logical outputs	2

3	Main function and connection
3.1	GPS information sending (speed, date, time, coordinates)	+
3.2	Sending information from external sensors	+
3.3	Internal memory for 120Thousand records . Storing collecting information if GPRS connection is absence.	+
3.4	Real Time operation mode	+
3.5	"Packet" operation mode	+	Use internal memory
3.6	Sleep mode	+
3.7	Active stand by mode	+
3.8	Driver identification	+
3.9	Immobilization function	+
3.10	Remote blocking engine starting (engine blocking)	+
3.11	Total fuel tanks monitoring	14
3.12	Regular vehicle fuel tanks monitoring	3	Connection to digital fuel sensor GuardMagic DLLS1 or to sensor with the same communication protocol
3.11	Cargo tanks (or fuel compartments) monitoring	11	Connection to digital fuel sensor (GuardMagic DLLE (DLLE) or fuel level sensor with the same communication protocol
3.12	Special (additional) "fuel interface" for cargo tanks	+
3.13	Fuel level resolution (levels)	1024 or 4096
3.14	Sending temperature information from fuel level sensors	+
3.15	Connection to digital temperature sensor . Temperature monitoring function	+	GuardMagic DTS or other temperature sensor with 1-wire communication protocol
3.16	Connection to regular engine overheat sensor. Sending overheat information	+
3.17	Ignition "On-Off" monitor	+
3.18	Car alarm connection and car alarm activation monitor	+
3.19	Regular fuel tank empty monitor and sending information	+
3.20	Crash sensor connection. Automatic sending information about road accident	+
3.21	Connection to PANIC button. Sending information pressing button	+
3.22	Connection to EVENT button. Sending information pressing button	+
3.23	Connection to engine RPM sensor. Sending information about engine RPM	+
3.24	Remote module reprogramming by GPRS	+

4	Additional function
4.1	GPS receiver status monitoring	+
4.2	"Digital Fuel Bus" status monitoring	+
4.3	Main power status monitoring	+
4.4	Automatic theft signal transmitting	+
4.5	Automatic transmitting information about not authorization engine starting	+
4.6	Possibility to connect additional data concentrator to EIA-485 interface	+
4.7	Possibility to connect the additional “Fuel Inlet Cap Sensor controller	+
4.8	Possibility to connect the additional “Trailer Identification module"*	+
4.9	Possibility to connect additional terminals (navigator, SCADA etc.) by RS-232 interface	+
4.10	External buzzer connection	+

| HOME |

| CONTACTS

EXPORT MAP

COOPERATION

DOWNLOADS|

| www.guardmagic.com | www.guardmagic.eu |

GuardMagic, Riga, Latvia (European Union)

general e-mails: avl@guardmagic.lv ; ( avl@guardmagic.com ; avl@guardmagic.eu )